Hylomar 2 Tubes Universal Blue Non-Setting Sealant Jointing Compound 3.5oz

Description

This listing is per lot of 3 tubes
Hylomar Universal Blue is a polyester urethane based sealant that is non-setting and non-hardening,
even at high temperatures. The compound is resistant to a wide range of fluids including all industrial
fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water/glycol
and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids
(Avtur & Avcat) and fluorocarbon refrigerants. Hylomar Universal Blue can be used to seal joint faces
or threaded parts.
Instructions for use:
Hylomar Universal Blue should be applied to clean dry surfaces. Apply a thin film or bead to one or
both
surfaces. Once applied, sufficient time should be allowed for the solvent to evaporate. Unlimited
assembly
time allows precise alignment of joints to be made. Due to the nature of the compound,
fasteners may be
required to be re-tightened to the correct torque. Hylomar Universal Blue can be
removed from dismantling
components by rubbing with a cloth soaked with Acetone. No scraping is
necessary.
Non-hardening and non-setting
Unlimited assembly time
Vibration resistant
Allows metal to metal contact
Resistant to combustion products, water, engine coolant, petroleum, lubricating oils &
kerosene
Comes with usage instructions and safety warnings
To ensure a secure and leak free seal between the gasket and the component part you may need
to use a suitable
joining compound. Hylomar supply's a wide range of high quality jointing compounds
all specifically designed to cater
for a wide range of situations.
Hylomar Universal Blue is a non-setting
jointing compound that is effective over a wide
range of temperatures and, is also resistant to a wide
range of fluids, including fuels, oils, water and lubricants. It can
be used to seal joint faces, on
preformed gaskets and threaded parts and is an effective sealant for metal to metal and
plastic to
plastic joints. This product never hardens offering the major benefit of unlimited usage time in terms
of
assembly and disassembly.
Hylomar has over 30 years of experience in providing engine, gearbox and transmission sealants and adhesives to
automotive manufacturers and the aftermarket both within the UK and internationally. Their original product was first
developed in conjunction with Rolls Royce and they still continue to manufacture Rolls Royce approved products today,
enabling them to ensure high quality and reliability across their whole product range.
Powered by SixBit's eCommerce Solution